carbon steel a350 lf2 flange Manufacturers

We are one of the leading manufacturer, exporter and supplier for LF2 Forged Flanges in India. Our Low temperature carbon steel forged flanges are used in many Pressure containing parts, Pressure vessel services. These carbon and low alloy steel forgings, requiring Notch Toughness Testing for Piping Components. We keep good inventory for LF2 Flanges for our Customers urgent requirements.

Specifications

Grade: ASTM A350 LF2

Size: ½" to 48"

Standard: ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, API, EN Flanges, MSSP, NACE, etc.

Type: Weld neck Flanges (WNRF), Slip-on Flanges (SORF), Blind Flanges (BLRF), Lap Joint Flanges (SOLJ), Socket-weld Flanges (SWRF), Screwed (Threaded) Flanges, Long weld neck Flanges (LWNRF), Spectacle Blind Flanges, Spacer & Blind Flanges, Ring Type Joint Flanges (RTJ), Reducing Flanges, Raised Face (RF) Flanges, Orifice Flanges, Large Diameter Flanges, Custom Flanges, Drawing Flanges, Forged Flanges, Plate Flanges, Flat Face Flanges, etc.

Dimensions: ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.

Class/Pressure: 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.

carbon steel ansi flange ratings

Pressure – Temperature Ratings

For Steel Pipe Flanges and Flanged Fittings

American National Standard ANSI B16.5 – 1988

CLASS	150 lb.	300 lb.	400 lb.	600 lb.	900 lb.	1500 lb.	2500 lb.
HYDROSTATIC TEST PRESSURE, PSIG	450	1125	1500	2225	3350	5575	9275
TEMPERATURE, F	MAXIMUM ALLOWABLE NON-SHOCK PRESSURE PSIG
-20 to 100	285	740	990	1480	2220	3705	6170
200	260	675	900	1350	2025	3375	5625
300	230	655	875	1315	1970	3280	5470
400	200	635	845	1270	1900	3170	5280
500	170	600	800	1200	1795	2995	4990
600	140	550	730	1095	1640	2735	4560
650	125	535	715	1075	1610	2685	4475
700	110	535	710	1065	1600	2665	4440
750	95	505	670	1010	1510	2520	4200
800	80	410	550	825	1235	2060	3430
850	65	270	355	535	805	1340	2230
900	50	170	230	345	515	860	1430
950	35	105	140	205	310	515	860
1000	20	50	70	105	155	260	430

Ratings apply to materials.

SA-1051.2 SA-515-702 SA-516-702 SA-181-701.2 SA-350-LF2 SA-537-C1.13 SA-216-WCB2

NOTES:

1. For service temperatures above 850 F it is recommended that killed steels containing not less than 0.10% residual silicon be used.

2. Upon prolonged exposure to temperatures above 800 F, the carbide phase of carbon steel may be converted to graphite.

3. The material shall not be used in thickness above 2-1/2 in.

Flanges of ANSI B16.5 shall not be used for higher ratings except where it is justified by the design methods of the Code.

Ratings are maximum allowable non-shock working pressures expressed as gage pressure, at the tabulated temperatures and may be interpolated between temperatures shown.

Temperatures are those on the inside of the pressure-containing shell of the flange. In general, it is the same as that of the contained material.

cs flange pressure rating

Maximum temperature and pressure ratings of flanges conforming dimensions ASME B16.5 Pipe Flanges and Flanged Fittings – and materials specification ASTM A-105 Specification for Carbon Steel Forgings for Piping Applications – temperature in Fahrenheit and pressure in psi.

Gage Pressure (psi)
Temperature (oF)	Flange Class
Temperature (oF)	150	300	400	600	900	1500	2500
< 100	285	740	985	1480	2220	3705	6170
200	260	680	905	1360	2035	3395	5655
300	230	655	870	1310	1965	3270	5450
400	200	635	845	1265	1900	3170	5280
500	170	605	805	1205	1810	3015	5025
600	140	570	755	1135	1705	2840	4730
650	125	550	730	1100	1650	2745	4575
700	110	530	710	1060	1590	2655	4425
750	95	505	675	1015	1520	2535	4230
800	80	410	550	825	1235	2055	3430
850	65	320	425	640	955	1595	2655
900	50	230	305	460	690	1150	1915
950	35	135	185	275	410	685	1145
1000	20	85	115	170	255	430	715

Hydrostatic Test Pressure (psig)	450	1125	1500	2225	3350	5575	9275

carbon steel blind flanges Manufacturers

We are widely known for offering premium quality carbon steel blind flanges. Designed and developed in compliance with international quality standards, these carbon steel blind flanges are made to suit the variegated requirements of diverse industries. Our product carbon steel blind flanges are shock proof and ensures high utility with low maintenance. Customization of these steel blind flanges are done as per the diverse demand & specifications of the clients all across the world.

Specifications :

Stainless Steel : ASTM A 182, A 240

Grade : F304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L, Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750

Carbon Steel : ASTM A 105, ASTM A 181

Carbon Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91

Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276

carbon steel flat face flanges Manufacturers

he Flat Face (FF) flange has a gasket surface in the same plane as the bolting circle face. Applications using flat face flanges are frequently those in which the mating flange or flanged fitting is made from a casting. Flat face flanges are never to be bolted to a raised face flange. ASME B31.1 says that when connecting flat face cast iron flanges to carbon steel flanges, the raised face on the carbon steel flange must be removed, and that a full face gasket is required. This is to keep the thin, bittle cast iron flange from being sprung into the gap caused by the raised face of the carbon steel flange.

Material of Construction	Standard	Grades
Carbon Steel Long Neck Flanges	ASTM A105	Gr. F42,46,52,56,60,65,70
Carbon Steel Long Neck Flanges	ASTM A182	F1,F5,F9,F11,F22,F91
Low Temperature Carbon Steel Long Neck Flanges	ASTM A350	LF2 , LF3

carbon steel forged flanges Manufacturers

Carbon Steel Forged Flanges

A flange is defined as a plate type device, normally round, that is attached to the end of a pipe, fitting, valve or other object to facilitate the assembly and disassembly of a piping system.

Flanges are manufactured in all the different materials to match the material of the pipe and fittings to which they are being attached. While some flanges are made of Cast Iron, the vast majority of flanges are forged carbon steel.

Forged steel flanges are made in seven primary ratings: Class 150, Class 300, Class 400, Class 600, Class 900, Class 1500 & Class 2500

Flange Types

Weld Neck Flanges
Slip-On Flanges
Lap Joint Flanges
Threaded Flanges
Socket Weld Flanges
Blind Flange

carbon steel forged flanges hs code

Alloy 20 Flanges

Forged and Plate Flanges

73269099	NON ALLOY/ CARBON STEEL FORGINGS (ROUGH/ SEMI FINISHED, EXCLUDING FLANGES & GRINDING MEDIA BALL VIZ. 4575 05 02 Socket	United Kingdom	Nhava Sheva Sea	NOS	320	72,393	226
73269099	NON ALLOY/ CARBON STEEL FORGINGS (ROUGH/ SEMI FINISHED, EXCLUDING FLANGES & GRINDING MEDIA BALL VIZ. 4575 05 02 Socket	United Kingdom	Nhava Sheva Sea	NOS	2,680	606,286	226
73269099	NON ALLOY/ CARBON STEEL FORGINGS (ROUGH/ SEMI FINISHED, EXCLUDING FLANGES & GRINDING MEDIA BALL VIZ. 4076 05 04 Socket	United Kingdom	Nhava Sheva Sea	NOS	280	74,274	265

73261990	CARBON STEEL FORGINGS (MACHINED) A105 -OCTO FLANGE CONNECT PRE MACHINED 20 DRGNO : 4.565158D, ITEM CODE : 130947	France	Nhava Sheva Sea	PCS	776	76,044	98
73261990	CARBON STEEL FORGINGS (MACHINED) A105 -OCTOG. FLANGE CONNECT PRE MACHINED 25 DRG NO : 4.565142, ITEM CODE : 130948	France	Nhava Sheva Sea	PCS	950	116,536	123
73261990	CARBON STEEL FORGINGS (MACHINED) A105 -OCTOG. FLANGE CONNECT PRE MACH 50-40I DRG NO : 3.565146 D, ITEM CODE : 130951	France	Nhava Sheva Sea	PCS	200	50,140	251

73261990	Carbon Steel Forging (Rough) 739380346XBODY FLANGE FORGINGLF2 A105	United States	Nhava Sheva Sea	PCS	22	31,529	1,433
73261990	Carbon Steel Forging (Rough) 732880342XBODY FLANGE FORGINGLF2 A105	United States	Nhava Sheva Sea	PCS	35	40,325	1,152

carbon steel lap joint flanges

Lap joint pipe flanges slide directly over the pipe and are most commonly used with stub end fittings. A pipe is usually welded to the Stub End and the Lap Joint pipe flange is free to rotate around the stub end. The benefit of this is that there will not be any issues with bolt hole alignment. Lap Joint pipe flanges are often used for applications that require frequent dismantling.

Size

Lap Joint Flange(Loose Flange):3/8″-80″

DN10-DN2000

Pressure

America Series:Class 150 ,Class 300, Class 600, Class 900A ,Class 1500,Class 2500.

Europe Series:PN2.5,PN6,PN10,PN16,PN25,PN40,PN63,PN100,PN160,PN250,PN320,PN400.

Flange Facing Types

America Series:Flat face(FF),Raised face(RF),Tongue(T),Groove(G),Female(F),Male(M),Ring type joints face(RJ/RTJ)

Europe Series:Type A(Flat Face),Type B(Raised Face),Type C(Tongue),Type D(Groove),Type E(Spigot),Type F(Recess),Type G(O-Ring Spigot),Type H(O-Ring Groove)

Material

Carbon steel: ASTM A105,ASTM A105N,GB 20,C22.8.

Low temperature steel: ASTM/ASME A402 WPL 3-WPL 6

High performance steel: ASTM/ASME A860 WPHY 42-46-52-60-65-70

Standards

ASME ANSI B16.5,ASME ANSI B16.47.

API 605,API 6L.

MSS SP 44

CSA Z245.12

EN1092-1,EN1759-1.

DIN2642,DIN2655,DIN2656.

BS1560,BS 4504,BS 10.

AFNOR NF E29-200-1

ISO7005-1

AS2129

JIS B2220

UNI 2276. UNI 2277.UNI 2278 .UNI 6089 .UNI 6090

carbon steel orifice flange manufacturers

Orifice flanges are used instead of the standard pipe flanges when orifice plate or flow nozzle is used. In other words, orifice flanges are used with orifice meters. The basic purpose for this is to measuring the flow rate of either gases or liquids in the respective pipeline. These flanges are used in various industrial applications and are available in various sizes and materials. All orifice flange units are supplied with the plate, pressure connection holes, and jack screws.

We offer a comprehensive range of Orifice Flanges, which is used for measuring the flow rate of either gases or liquids in the respective pipeline. These flanges are available in various sizes, shapes, and dimensions. We ensure to test our range on well defined parameters at our own premises to deliver flawless products.

Material

Carbon steel: ASTM A105,ASTM A105N,GB 20,C22.8.

Low temperature steel: ASTM/ASME A402 WPL 3-WPL 6

Key Features:

Come with either raised faces or ring type joint (RTJ ) facings.
The orifice flanges have modifications of radial tapped holes in the flange ring for meter connections.
There are the orifice plate carriers in these flanges for the reason of fitting meter connections.
The additional bolts available serve as a jack to allow the separation of the two flanges to change the orifice plate or for other relevant services like inspection.

Uses of orifice flanges:

The basic purpose of an orifice flange is used to flow/rate metering of piping systems.
They are used for all intensive purposes, similar to weld neck and slip-on flanges with extra machining

carbon steel plate flanges manufacturers

1/2" through 108"
Welding neck flange, slip on flange, socket welded flange, blind flange, lap joint flange, threaded flange
A105 and A36
All schedules, special bores, and facing. Galvanized plate flanges available.
Material will meet the relevant specifications.

carbon steel raised face flanges Manufacturer

The Raised Face flange is the most common type used in process plant applications, and is easily to identify. It is referred to as a raised face because the gasket surfaces are raised above the bolting circle face. This face type allows the use of a wide combination of gasket designs, including flat ring sheet types and metallic composites such as spiral wound and double jacketed types.

The purpose of a RF flange is to concentrate more pressure on a smaller gasket area and thereby increase the pressure containment capability of the joint. Diameter and height are in ASME B16.5 defined, by pressure class and diameter. Pressure rating of the flange determines the height of the raised face.

The typical flange face finish for ASME B16.5 RF flanges is 125 to 250 µin Ra (3 to 6 µm Ra).

Nominal Pipe Size	3"
Class	150#
Face	Raised Face
Material	Carbon Steel
# of Bolt Holes	4
Bolt Circle Diameter	6.00"
Bolt Diameter	0.62"
Bolt Hole Diameter	0.75"
Flange Diameter	7.50"
Flange Thickness	0.94"
Hub Diameter	4.25"
Length Through Hub	1.19"
Machine Bolt Length	3.25"
Min. Bore Diameter	3.57"
Raised Face Diameter	5.00"
Specification(s)	ASME B16.5
Stud Bolt Length	3.75"

carbon steel din flanges Manufacturers

Carbon Steel DIN EN 1092-1 Steel Flanges for pipes

Click on below for size & specification:-

PLATE FLANGE
WELD NECK FLANGE
THREADED FLANGE
BLIND FLANGE
LOOSE FLANGE

din bs en 1092-1 Flanges
1.ANSI DIN JIS BS4504 EN1092-1 AS2129 GOST12820 SABS1123
2.DN15-DN2000
3.A105, Q235, Rst37.2, C22.8

CARBON STEEL FLANGE Manufacturers, suppliers
1) Size:1/2"-72", DN15-DN2000
2) Material:
carbon steel: A105,Q235, Rst37.2,SS400, SF440, P250GH, C22.8, S235JR
stainless steel: F304,F304L,F316,F316L,316Ti
3) Standard:ANSI, JIS, DIN, BS4504, SABS1123, EN1092-1, UNI, AS2129, GOST12820
4) Types:Plate, Slip-on, Welding Neck, Thread, Blind, Socket Weld

DIN flange –The standard of DIN flanges coversDIN 2527 PN6, PN10, PN16, PN25, PN40, PN64, PN100 for Blind Flange, DIN2573 PN6, DIN2576 PN10, DIN2543 PN16, DIN2544 PN25, DIN2545 PN40, DIN2502 PN16, DIN2503 PN25, DIN2503 PN40 for Flat Flange for welding (Slip On), DIN2630 PN1, DIN2630 PN2.5, DIN2631 PN6, DIN2632 PN10, DIN2633 PN16, DIN2634 PN25, DIN2635 PN40, DIN2636 PN64 , DIN2637 PN100, DIN2638 PN160, DIN2628 PN250, DIN2629 PN320, DIN2627 PN400 for Welding Neck Flange, DIN 2641 PN6, DIN2642 PN10 for Lapped (Lapped Joint) Flange, Plain Collar, DIN2652 PN6, DIN2653 PN10, DIN2655 PN25, DIN2656 PN40 for Loose Flange and Ring for Weld (Slip-On Flange and Plain Collar) , DIN2673PN10, DIN2674 PN16, DIN2675 PN25, DIN2676 PN40 for Loose Flange and Ring with Neck for Welding, DIN2558 PN6 for Oval Plain Threaded Flange, DIN2561 PN10, PN16 for Oval Flange with Neck Threaded, DIN2565 PN6, DIN2566 PN10, DIN2566 PN16, DIN2567 PN25, DIN2567 PN40, DIN2568 PN64, DIN2569 PN100 for Threaded Flange with Neck, DIN28115 PN10, PN25 for Long Neck Welding Flange and DIN86029 PN10, DIN86030 PN16 for Hubbed Slip On Flange for Welding for sizes up to DN4000 diameter. Our pressure rating includes PN1, PN2.5, PN6, PN10, PN16, PN25, PN40, PN64, PN100, PN160, PN250,

carbon steel pn16 flange dimensions, carbon steel plate flanges dimensions

EN 1092-1 TYPE 01 PN6 PLATE FLANGE
Rated Diameter	Pipe	Flange				Screws			Weight (7,85 Kg/dm3)
Rated Diameter	Pipe	d1	k	D	b	d2	Thread	Bolt holes	KG
15	21,3	22,0	55	80	12	11	M10	4	0,401
20	26,9	27,5	65	90	14	11	M10	4	0,590
25	33,7	34,5	75	100	14	11	M10	4	0,716
32	42,4	43,5	90	120	16	14	M12	4	1,153
40	48,3	49,5	100	130	16	14	M12	4	1,344
50	60,3	61,5	110	140	16	14	M12	4	1,478
65	76,1	77,5	130	160	16	14	M12	4	1,850
80	88,9	90,5	150	190	18	18	M16	4	2,944
100	114,3	116,0	170	210	18	18	M16	4	3,247
125	139,7	141,5	200	240	20	18	M16	8	4,301
150	168,3	170,5	225	265	20	18	M16	8	4,741
200	219,1	221,5	280	320	22	18	M16	8	6,862
250	273,0	276,5	335	375	24	18	M16	12	8,893
300	323,9	327,5	395	440	24	22	M20	12	11,880
350	355,6	359,5	445	490	26	22	M20	12	16,788
400	406,4	411,0	495	540	28	22	M20	16	19,781
450	457,0	462,0	550	595	30	22	M20	16	24,495
500	508,0	513,5	600	645	30	22	M20	20	26,307
600	610,0	616,5	705	755	32	26	M24	20	34,702
700	711,0	714,2	810	860	40	26	M24	24	52,441
800	813,0	815,8	920	975	44	30	M27	24	71,262
900	914,0	917,4	1020	1075	48	30	M27	24	86,269
1000	1016,0	1019,0	1120	1175	52	30	M27	28	101,340
1200	1220,0	1224,0	1340	1405	60	33	M30	32	162,638
1400	1420,0	1424,0	1560	1630	72	36	M33	36	257,772
1600	1620,0	1624,0	1760	1830	80	36	M33	40	324,382

EN 1092-1 TYPE 01 PN10 PLATE FLANGE
Rated Diameter	Pipe	Flange				Screws			Weight (7,85 Kg/dm3)
Rated Diameter	Pipe	d1	k	D	b	d2	Thread	Bolt holes	KG
15	21,3	22,0	55	80	12	11	M10	4	0,401
20	26,9	27,5	65	90	14	11	M10	4	0,590
25	33,7	34,5	75	100	14	11	M10	4	0,716
32	42,4	43,5	90	120	16	14	M12	4	1,153
40	48,3	49,5	100	130	16	14	M12	4	1,344
50	60,3	61,5	110	140	16	14	M12	4	1,478
65	76,1	77,5	130	160	16	14	M12	4	1,850
80	88,9	90,5	150	190	18	18	M16	4	2,944
100	114,3	116,0	170	210	18	18	M16	4	3,247
125	139,7	141,5	200	240	20	18	M16	8	4,301
150	168,3	170,5	225	265	20	18	M16	8	4,741
200	219,1	221,5	295	340	24	22	M20	8	9,244
250	273,0	276,5	350	395	26	22	M20	12	11,788
300	323,9	327,5	400	445	26	22	M20	12	13,578
350	355,6	359,5	460	505	30	22	M20	16	21,766
400	406,4	411,0	515	565	32	26	M24	16	27,436
450	457,2	462,0	565	615	36	26	M24	20	33,470
500	508,0	513,5	620	670	38	26	M24	20	40,103
600	610,0	616,5	725	780	42	30	M27	20	54,297
700	711,0	714,2	840	895	50	30	M27	24	82,777
800	813,0	815,8	950	1015	56	33	M30	24	116,534
900	914,0	917,4	1050	1115	62	33	M30	28	141,425
1000	1016,0	1019,0	1160	1230	70	36	M33	28	188,561
1200	1219,0	1224,0	1380	1455	83	39	M36	32	290,884

EN 1092-1 TYPE 01 PN16 PLATE FLANGE
Rated Diameter	Pipe	Flange				Screws			Weight (7,85 Kg/dm3)
Rated Diameter	Pipe	d1	k	D	b	d2	Thread	Bolt holes	KG
10	17,2	18,0	60	90	14	14	M12	4	0,602
15	21,3	22,0	65	95	14	14	M12	4	0,668
20	26,9	27,5	75	105	16	14	M12	4	0,933
25	33,7	34,5	85	115	16	14	M12	4	1,106
32	42,4	43,5	100	140	18	18	M16	4	1,816
40	48,3	49,5	110	150	18	18	M16	4	2,075
50	60,3	61,5	125	165	20	18	M16	4	2,723
65	76,1	77,5	145	185	20	18	M16	4	3,310
80	88,9	90,5	160	200	20	18	M16	8	3,592
100	114,3	116,0	180	220	22	18	M16	8	4,375
125	139,7	141,5	210	250	22	18	M16	8	5,394
150	168,3	170,5	240	285	24	22	M20	8	7,123
200	219,1	221,5	295	340	26	22	M20	12	9,705
250	273,0	276,5	355	405	29	26	M24	12	14,164
300	323,9	327,5	410	460	32	26	M24	12	18,928
350	355,6	359,0	470	520	35	26	M24	16	28,118
400	406,4	411,0	525	580	38	30	M27	16	35,754
450	457,0	462,0	585	640	42	30	M27	20	45,992
500	508,0	513,5	650	715	46	33	M30	20	63,832
600	610,0	616,5	770	840	55	36	M33	20	101,285
700	711,0	714,2	840	910	63	36	M33	24	111,103
800	813,0	815,8	950	1025	74	39	M36	24	158,555
900	914,0	917,4	1050	1125	82	39	M36	28	192,239
1000	1016,0	1019,0	1170	1255	90	42	M39	28	269,554
1. SURFACE FINISH FACING TYPES A, B1, B2 etc
2. FLANGE MARKING: LOGO EN 1092-1 / 01 A / DN100 / PN16 / P245GH / HEAT NUMBER

carbon steel flange standard

Sr. No.	Material	Size	Class	Specification	Item
1.	Forged Flanges	15 NB To 750 NB	150, 300, 600, 900 & 1500 LBS	A-105 ANSI B16.5	Flanges, SORF, WNRF, BLRF, SWRF, LAP Joint, Threaded, Reducing
2.	Plate Flanges	15 NB To 500 NB	ASA 150, ASA 300 Table D, E, F, H, DIN, ND-6, 10, 16, 25, 40	A-516, Gr.60/70 IS 2062 ANSI B16.5	SORF, BLRF, LAP Joint & Spectacle

Note :-
Other Grade Available	:-	A-350 LF2, ASTM B-333
OTHER FORMS	:-	Compression Fitting / Instrumentation / Hydraulic Fitting / & Also As Per Drawing :
Test Certificate	:-	Manufacturer Test Certificate / IBR Test Certificate (Form III-C), Under Third Party Inspection & with Excise Gate Pass to avail Modvat benefit.
Specialize	:-	§ Long Bend with Radius – R = 3D, 5D & 10D § Pigabble Bend & IBR Fittings

types of carbon steel flanges

Specifications :-

Standards	:	ANSI, JIS, DIN, EN1092-1, UNI, BS4504, SABS1123, AS2129, GOST-12820
Dimension	:	ANSI B 16.5, BS 1560. BS 10, IS 6392, B-2.1 NPT, API, DIN, JIS. MSS SP 44
Material	:	ASTM A105, ASME A105 ASTM A266 GR.1, GR.2, GR.3, GR.4 ASTM A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2 ASTM A694 F42, F46, F48, F50, F52, F56, F60, F65, F70
Class	:	150#, 300#, 400 #, 600#, 900#, 1500# & 2500#
Size	:	1/2” NB TO 24” NB.
Wall Thickness	:	SCH.10, 20, 30, 40, 80, 120, 160, STD, XS, XXS.
Form	:	Slip on Flanges – SORF, Weld neck Flanges – WNRF, Socket weld Flanges – SWRF, Blind Flanges – BLRF Lapped joint Flanges, Screwed Flanges, Long weld neck Flanges, Reducing Flanges, Spectacle Flanges, Ring joint Flanges

Types Of Carbon Steel Flanges

•	Carbon Steel Forged Flanges	•	Carbon Steel High Hub Blinds Flanges
•	Carbon Steel Blind Flanges	•	Carbon Steel Spectacle Blinds Flanges
•	Carbon Steel Reducing Flanges	•	Carbon Steel Loose Flanges
•	Carbon Steel Orifice Flanges	•	Carbon Steel RTJ Flanges
•	Carbon Steel Socket Weld Flanges	•	Carbon Steel Screwed Flanges
•	Carbon Steel Slip On Flanges	•	Carbon Steel Weld Neck Flanges
•	Carbon Steel Flat Flanges	•	Carbon Steel Flange Facing Type & Finish
•	Carbon Steel Lapped Joint Flanges	•	Carbon Steel SORF Flanges
•	Carbon Steel SWRF Flanges	•	Carbon Steel Groove & Tongue Flanges
•	Carbon Steel Square Flanges	•	Carbon Steel Long Neck Weld Flanges
•	Carbon Steel Threaded Flanges	•	Carbon Steel Spades Ring Spacers Flanges
•	Carbon Steel Weld Neck Flanges Series A or B	•	Carbon Steel Ring Type Joint Flanges
•	Carbon Steel WNRF Flanges	•	Carbon Steel Weldo / Nipo Flanges
•	Carbon Steel Expander Flanges

Carbon Steel flange dimensions


Carbon Steel ring type joint flanges	Carbon Steel raised face flanges	Carbon Steel Flat face flange supplier	Carbon Steel flange suppliers uk	Carbon Steel flange uae

Carbon Steel collar flanges	Carbon Steel flat face flanges	Carbon Steel spectacle blind flange bolts	Carbon Steel slip on flanges	Carbon Steel threaded flanges