A105N Flanges Manufacturer, Supplier & Stockist
We offer High Quality A105N Flanges in Verious Type Like A105N Slip On Flange, A105N Blind Flange, A105N Weld NeckFlanges, A105N Socket Weld Flanges, A105N Plate Flanges, A105N Lapped Joint Flanges, A105N Threaded Flanges, A105N A105N Flanges
We have A105N Flanges in Huge Quantity in our Stockyard at ready Stock at Best Price
Jayant Impex is acknowledged as a manufacturer, exporter & suppliers of A105N Flanges Flange & Stainless steel Flanges (Gr. 304, 304L, 316, 316L) available in a variety or grades, materials, and finishes, in metric and inch sizes. These A105N Flanges Flange are manufacture in different Type of Flanges like A105N Blind Flange, A105N Spectacle Blind Flange, A105N Slip On Flange, A105N Socket Welding Flange, A105N Welding Neck Flange, SORF Flanges, A105N Collar Flange, A105N Plate Flange,A105N Raised Face Flange, A105N Flat Face Flange, SWRF, WNRF, BLRF, A105N Lapped Joint Flange, A105N Ring Type Joint Flange, A105N Threaded Flange & A105N Long Welding Neck Flange
A105 Flanges are used for ambient and high temperature services and by nature have hardness level and nickel content within the limit of NACE. ASTM A105 has no grade.Sometimes A105N is described. N stands not for Grade, but for normalized. Normalizing is a type of heat treatment, applicable to ferrous metals only. The purpose of normalizing is to remove the internal stresses induced by heat treating, casting, forming etc. A105 / A105N flanges are used in low and middle pressure fluid pipe line, boiler, petroleum and natural gas industry, electric industry , shipbuilding, fertilizer equipment, etc,.
A105N Flanges Flange Price:
ASME B16.47 ASTM A105 WN RF/RTJ Flange
US $1-10000 / Piece ( FOB Price)
1/2″-24″ ASME B16.5 a105 welding neck flanges ANSI flange
US $1-3 / Piece ( FOB Price)
A105N Flanges Flange Type
|
|
|
|
|
|
|
|
|
|
|
|
|
A105N Flanges Production Range
| Specification | ASTM A182 / A240 & ASME SA182 / SA240 |
| Grade | Carbon Steel ASTM A105 / A105N, A350 LF2, A350 LF3, Carbon Steel: ASTM/ASME A694 F42 / F46 / F52 / F56 / F60 / F65 / F70 |
| Standard | ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. |
| Size | 1/8″ to 36″/ |
| Dimensions | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Class / Pressure | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Product | Size | |
| A105N Slip-On Flanges | A105N Threaded Flanges | 1/8″ – 36″Raised Face or Flat Face |
| A105N Weld Neck Flanges | A105N Flanges Socket Weld Flanges | |
| A105N Blind Flanges | A105N Reducing Flanges | |
| A105N Lap Joint Flanges | A105N Plate Flanges | |
A105N Flanges Specifications
Carbon Steel ASTM A105 Flanges
| STANDARDS | DESIGNATION |
|---|---|
| ASTM | A105 / A105N |
A105N Flanges Mechanical & Physical Properties
|
Grade
|
Condition
|
Tensile Strength min (MPa)
|
Yield Strength min (MPa)
|
Elongation
(L = 4d%)
|
Reduction of Area %
min
|
Brinell Hardness max
|
|
A105
|
–
|
485
|
250
|
22
|
30
|
187
|
|
–
|
||||||
A105N Flanges Chemical Composition
|
Grade
|
C
|
Mn
|
P
|
S
|
Si
|
Cu
|
Ni
|
Cr
|
Mo
|
V
|
|
A105
|
–
|
0.60
|
–
|
–
|
0.10
|
–
|
– | – | ||
|
0.35
|
1.05
|
0.035
|
0.040
|
0.35
|
0.40
|
0.40
|
0.30 |
0.12
|
0.08 |
Heat Treatment:
Heat treatment is not mandatory requirement except:
1) Flanges above Class 300
2) Flanges of special design where the design pressure at the design temperature exceeds the rating of Class 300.
3) Flanges of special design where the design pressure or design temperature are not known.
Heat treatment, when required shall be annealing, normalizing OR normalizing and tempering OR quenching and tempering.
A105N Weld Neck Flanges
Looking for Stainless Steel Weld Neck Flanges manufacturers from India, then Jayant Impex is a right choice. Get the Best Price quote Now!!!
Weld neck flanges are often used for applications where high pressure is a factor. The inside diameter of the flange is designed to match the pipe’s inside diameter. Weld Neck Pipe flanges with a hub have published specifications that range from 1/2″ thru 96″. Our company manufacturing these Weld Neck flanges in all material grades, specifications and sizes.
Weld neck pipe flanges are typically provided with a raised face, flat face, or RTJ facing. When a raised face is necessary for weld neck pipe flanges, the standard height is 1/16″ for weld neck pipe flanges under 400#. For weld neck pipe flanges of 400# and up, the standard weld neck pipe flange raised face height is 1/4″.
Specialized in manufacturing:
- A105N Weld Neck Flanges
- Larger sizes available
- To ANSI/ASME B16.5 standards
- To BS10 table E standards
- To EN1092-1 Standards (Was BS4504)
- Sizes 1/2″ to 8″ (DN15 to DN200)
- Higher pressures available
- To BS4504 & DIN standards
- PN16 & ASA 150 LB rated
A105N Slip-On Flanges
Slip on pipe flanges are typically provided with a raised or flat face. When a raised face is necessary for slip on pipe flanges, the standard height is 1/16″ for slip on pipe flanges under 400#. For slip on pipe flanges of 400# and up, the standard slip on pipe flange raised face height is 1/4″.
Jayant Impex manufactures slip on pipe flanges in all steel material grades, including carbon slip on pipe flanges, stainless steel slip on pipe flanges and alloy slip on pipe flanges. Jayant Impex also has many different slip on pipe flanges in stock and ready to ship. Slip on pipe flanges in stock include AWWA slip on pipe flanges, ANSI slip on pipe flanges, Pressure Vessel slip on pipe flanges and slip on pipe flanges that match the OD and drilling of ASME flanges.
Specialized in manufacturing:
- A105N Slip-On Flanges
- Larger sizes available
- To ANSI/ASME B16.5 standards
- To BS10 table E standards
- To EN1092-1 Standards (Was BS4504)
- Sizes 1/2″ to 8″ (DN15 to DN200)
- Higher pressures available
- To BS4504 & DIN standards
- PN16 & ASA 150 LB rated
A105N Threaded Flanges
Looking for A182 Stainless Steel Threaded Flanges in specific standards & size at Factory Rate?
Threaded pipe flanges are typically provided with a raised face, flat face, or RTJ facing. When a raised face is necessary for threaded pipe flanges, the standard height is 1/16″ for threaded pipe flanges under 400#. For threaded pipe flanges of 400# and up, the standard threaded pipe flange raised face height is 1/4″.
Jayant Impex manufactures threaded pipe flanges in all steel material grades, including carbon threaded pipe flanges, stainless steel threaded pipe flanges and alloy threaded pipe flanges. Jayant Impex also has many different threaded pipe flanges in stock and ready to ship.
Specialized in manufacturing:
- A105N Threaded Flanges
- Larger sizes available
- To ANSI/ASME B16.5 standards
- To BS10 table E standards
- To EN1092-1 Standards (Was BS4504)
- Sizes 1/2″ to 8″ (DN15 to DN200)
- Higher pressures available
- To BS4504 & DIN standards
- PN16 & ASA 150 LB rated
A105N Flanges Socket Weld Flanges
Looking for A105N Flanges Socket Weld Flanges in specific standards & size at Factory Rate?
Socket Weld pipe flanges are typically provided with a raised face, flat face, or RTJ facing. When a raised face is necessary for socket weld pipe flanges, the standard height is 1/16″ for socket weld pipe flanges under 400#. For socket weld pipe flanges of 400# and up, the standard socket weld pipe flange raised face height is 1/4″.
Jayant Impex manufactures socket weld pipe flanges in all steel material grades, including carbon socket weld pipe flanges, stainless steel socket weld pipe flanges and alloy socket weld pipe flanges. Jayant Impex also has many different socket weld pipe flanges in stock and ready to ship.
Specialized in manufacturing:
- A105N Flanges Socket Weld Flanges
- Larger sizes available
- To ANSI/ASME B16.5 standards
- To BS10 table E standards
- To EN1092-1 Standards (Was BS4504)
- Sizes 1/2″ to 8″ (DN15 to DN200)
- Higher pressures available
- To BS4504 & DIN standards
- PN16 & ASA 150 LB rated
A105N Blind Flanges
Blind pipe flanges are typically provided with a raised face, flat face, or RTJ facing. When a raised face is necessary for blind pipe flanges, the standard height is 1/16″ for blind pipe flanges under 400#. For blind pipe flanges of 400# and up, the standard blind pipe flange raised face height is 1/4″.
Jayant Impex manufactures blind pipe flanges in all steel material grades, including carbon blind pipe flanges, stainless steel blind pipe flanges and alloy blind pipe flanges. Jayant Impex also has many different blind pipe flanges in stock and ready to ship. Blind pipe flanges in stock include ANSI B16.5 blind pipe flanges, ASME B16.47 Series “A” blind pipe flanges, ASME B16.47 Series “B” blind pipe flanges and Pressure Vessel weld neck pipe flanges. Jayant Impex also manufactures custom weld neck pipe flanges per customer requirements.
Specialized in manufacturing:
- A105N Blind Flanges
- Larger sizes available
- To ANSI/ASME B16.5 standards
- To BS10 table E standards
- To EN1092-1 Standards (Was BS4504)
- Sizes 1/2″ to 8″ (DN15 to DN200)
- Higher pressures available
- To BS4504 & DIN standards
- PN16 & ASA 150 LB rated
A105N Reducing Flanges
A pipe flange is a disc, collar or ring that attaches to pipe with the purpose of providing increased support for strength, blocking off a pipeline or implementing the attachment of more items. They are usually welded or screwed to the pipe end and are connected with bolts.
Specialized in manufacturing:
- A105N Reducing Flanges
- Larger sizes available
- To ANSI/ASME B16.5 standards
- To BS10 table E standards
- To EN1092-1 Standards (Was BS4504)
- Sizes 1/2″ to 8″ (DN15 to DN200)
- Higher pressures available
- To BS4504 & DIN standards
- PN16 & ASA 150 LB rated
A105N Lap Joint Flanges
Jayant Impex manufactures lap joint pipe flanges in all steel material grades, including carbon lap joint pipe flanges, stainless steel lap joint pipe flanges and alloy lap joint pipe flanges. Jayant Impex also has many different lap joint pipe flanges in stock and ready to ship. Jayant Impex can also manufacture custom pipe flanges according to customer specifications.
Specialized in manufacturing:
- A105N Lap Joint Flanges
- Larger sizes available
- To ANSI/ASME B16.5 standards
- To BS10 table E standards
- To EN1092-1 Standards (Was BS4504)
- Sizes 1/2″ to 8″ (DN15 to DN200)
- Higher pressures available
- To BS4504 & DIN standards
- PN16 & ASA 150 LB rated
A105N Plate Flanges
Packaging Details: wooden case packing
Delivery Detail: 20 days
Specifications
1. High in Quality
2. Moderate in Price
3. Special design available
4.Inspection System Control and Best Service
Material: Carbon Steel
connection: welding,threaded
Model Number: plate flange
pressure: 150bl-2500bl
material:304,316, etc.
Specialized in manufacturing:
- A105N Plate Flanges
- Larger sizes available
- To ANSI/ASME B16.5 standards
- To BS10 table E standards
- To EN1092-1 Standards (Was BS4504)
- Sizes 1/2″ to 8″ (DN15 to DN200)
- Higher pressures available
- To BS4504 & DIN standards
- PN16 & ASA 150 LB rated
A105N Flanges